Caractéristiques du produit
• Steyr is usedWD10G175E15 Engine，Energy saving and environmental protection、High efficiency and low consumption、Powerful，Low noise。
• Novel sealed steel hexahedron cab，Wide field of vision。
• Control arrangement conforms to ergonomic principle，Light and flexible，Comfortable driving。
• Wetland triangular track，Small grounding specific voltage，It can meet the needs of wetlands、The swamp、Work sites with soft soil such as garbage filling sites。
• Equipped with mud scraping device, it can effectively remove the soil adhered to the track.、Garbage, etc。
• Electronic monitoring and sound-light alarm system，It can monitor the operation status of the whole machine at any time to ensure the normal operation of the equipment.。
• Centralized pressure measurement，Make the detection and maintenance more convenient and fast。
• Beautiful appearance of the whole machine，Enlarged hexahedral cab and higher bridge make the driver's vision wider.;New cab seat，More comfortable，Reduces driver fatigue。Meanwhile, the sealing performance is good，Greatly reduce noise pollution。High Power Air Conditioning System and Its Reasonable Air Outlet Arrangement，Make the air in the cab fresh and smooth。
Paramètres du produit
| Engine | ||
| Model | WD10G178E25 | |
| Type | Pressurized water-cooled in-line four-stroke | |
| Number of cylinders-Cylinder bore×Travel | 6-126×130mm | |
| Rated power/Rated speed | 131 kW/1850 r/min | |
| Maximum torque | 830 N.m/（1100//1200 r/min） | |
| Fuel consumption rate | ≤215 g/kW.h | |
| Transmission | ||
| Torque converter | 3 elements, 1stage, 1 phase | |
| Gearbox | Powershift planetary transmission | |
| Type | Planetary gear、Multi-plate clutch、Manual operation、Power shift | |
| Central drive | Spiral bevel gear、Splash lubrication type | |
| Final drive | Spur gear 2nd reduction、Splash lubrication | |
| Shift gear、Speed | ForwardⅠFile | 0-3.8 km/h |
| ForwardⅡFile | 0-6.6km/h | |
| ForwardⅢFile | 0-10.6 km/h | |
| Back offⅠFile | 0-4.9km/h | |
| Back offⅡFile | 0-8.5 km/h | |
| Reverse gear | 0-13.6 km/h | |
| Hydraulic control mechanism | ||
| Type | Gear pump | |
| Work pressure | 14mpa | |
| Maximum flow | 230L/min(200r/min) | |
| Control valve type | Manual multi-position valve | |
| Bogie frame | ||
| Number of supporting sprockets（Each side） | 2 | |
| Number of rollers（Each side） | Seven | |
| Number of leading wheels（Each side） | 1 | |
| Track | ||
| Pitch | 203.2 mm | |
| Width | 950 mm | |
| Track center distance | 2300 mm | |
| Ground contact length of track | 2935 mm | |
| Ground specific pressure | 31kPa | |
| Working device and accessories | ||
| Push | Type | Wetland shovel/Sanitation shovel |
| Earth | Width | 4150/4150 mm |
| Shovel | Height | 1039/1595 mm |
| Maximum lifting height | 1052/1052 mm | |
| Maximum descent | 450/450 mm | |
| Scarifier | Number of teeth | 3 |
| Maximum scarification depth | 572mm | |
| Maximum lifting height | 702mm | |
| Ripper type | Four-bar linkage | |
| Ripper weight | 1480kg | |
| Overall dimensions of the complete machine | ||
| Full length | 5305 mm | |
| Full width | 4150 mm | |
| Full height（To the top of the exhaust pipe） | 2835 mm | |
