Caractéristiques du produit
Structure de train de roulement
Self-extendable crawler insures stability in transportation (3400mm) and also meet construction requirement (4500mm). Crawler extend-retract operation controlled by hydraulic power which is fast and precision. 800mm width crawler could meet work in soft ground job sites.
Mât principal et ensemble de poulie
Main mast adopts two flexible sections. Extend-retract operation guides by one winding. There are two height choices, 31000mm(Modèle : JVU160) for CFG and 24500mm for rotary drilling and hammer. All height adjustment operation complete by machine itself. Main mast use stable three points support. Universal jointed shaft in the mast bottom which promise precision adjustment and reliable structure. Unique triangle base structure not only afford erection task but also finish side move without whole machine move. Main mast section use table rectangle structure. Allocate CFG or rotary drilling rig work by change the pulley combination..
Treuil et système hydraulique
Machine travel, slewing and main-vice winch adopt hydraulic power control. The pull force of main winch single line reaches 17t(Modèle : JVU160) and also configures advanced electric hydraulic drilling following system. Vice winch line’s pull force reach 7t(Modèle : JVU160) and its operation is very exactness. Add pressure winch able to offer another more 8t force. This configuration not only offer additive pressure for rotary drilling but also offer reliable technology guaranty for break rock in DHT hammer construction way. Advanced gear pump have strong ability to resist pollution and long use life. Three pumps joint together and insures high speed when the main winch under work. One pump controls the two walk legs and avoids unbalance flow in tradition models. Fuel tank locates at the back of platform and realize simple and orderliness platform.
Fonctionnement et pièces électroniques
Good sight for the operator as the front cab design. Anti-drop network is settled to ensure safety of the driver. Adopt PLC in operation system. Drilling depth, rotation location and vertical degree are shown on the display screen which supplies direct information to the operator. The operation platform use man-machine interaction way for check and adjust the parameters. Instead of fuel, we use electricity which is energy saving and no pollution.
Plate-forme principale et mécanisme de pivotement
The main platform adopt large box-type structure section with powerful carrying capacity and rigidity. Double support in slewing driver part have the ability to avoid the rotary gear loosen or broken in traditional structure. The main platform structure is simple and easy for maintenance.
Résumé
Light weight, flexible in movement, efficient in piling, meet different jobsites construction requirements, large torque, energy saving and no pollution. With high quality and competitive price, CHTC JOVE new generation Long Auger Drilling Rig is an excellent choice for our customers.
Rapport performance / prix élevé
Under the same performance index, it has lower transport weight, more convenient for moving and transportation; lower maintenance charge, lower operate fee (Compare with diesel engine rotary drilling rig, it can save more than 50% charge).
Paramètres du produit
| Modèle | Modèle : JVU160 | |
|---|---|---|
| Largeur maximum de travail de chenille ( millimètre) | 4500 | |
| Dimension de transport ( L & times ; W & times ; H) ( millimètre) | 18500x3400x3400 | |
| Charge maximum avec le dispositif d 'opération ( T) | 14 | |
| Avec tête de forage | Puissance ( kilowatt) | 160 |
| Couple ( KN / m) | 250 | |
| Profondeur de perçage ( m) | Sous diamètre 800 ( mm), ( 26 + 5) m | 31 |
| Plus de diamètre 800 ( mm) | 26 | |
| Hauteur maximale du cadre du pieu ( m) | 31 | |
| Système hydraulique | Pression du système principal ( MPa) | 32 |
| Oui, Max. Débit de la pompe principale ( L / min) | 435 | |
| Puissance de moteur ( kilowatt) | 160 | |
| Ligne vitesse ( m / min) | 54 | |
| Force d 'extraction maximale ( kN) | 680 | |
| Ligne principale maximum traction de treuil ( kN) | 170 | |
| Max auxiliaire ( kN) | 40 | |
| Vitesse de déplacement ( m / min) | 12 | |
| Diamètre de perçage ( millimètre) | 1200 | |
| Capacité de grade | 30% | |
| Vitesse de rotation ( r / m) | 0.4 | |
| Angle de pivotement ( & deg ;) | 180 | |
| Poids de transport ( kg) | 59000 | |
| Poids lesté ( kg) | 11500 | |
| Charge maximale de déplacement ( kg) | 80000 | |
