FOTON FTC25X5 China VI Camion-grue
Caractéristiques du produit
1、Performance:Developed on the same platform,Beyond 25TPlatform products
The main arm adoptsBS700MCHigh strength steel plate,Height increase 40mm Width increase 20mm Fully optimizedUType large circular arc section,,Single-board arm head is adopted,Increase the lap length;
Main arm industry up to 43 meters long,Legs span up to industry's largest 6.4 meters,Movable outrigger widened by 40mm、Heightened by 30mm;
6+1 ton of movable counterweight improves the lifting capacity 5-10%Left and right。
2、Efficient:Operation speed is higher than that of competitive products,Smoother action at low speed
The inner diameter of the luffing cylinder reaches 240MM;
Variable double pump confluence and 107ml/rWinding variable motor,Single-rope no-load speed up to 145 m/Minute,Single rope full load speed up to 90 m/Minute,Leading the industry;
Precise control in slow gear,Lower minimum stable speed,The movement is more stable。
Simultaneous action of telescoping and auxiliary winch,And that main arm can be freely combine to extend and retract.,10% more productive-15%;
3、Energy saving:Industry initiativeI-ECON Energy-saving technology,Fuel saving 15%
Automatically identify the engine speed with the lowest fuel consumption under the working condition according to the load;
The engine is automatically matched to the lowest fuel consumption speed from the current state;
And is not influence by subjective operation of a user.,No matter how the user's operation force changes.,The engine is always in the most fuel-efficient state.
4、Cozy:More comfortable driving and working environment
Auman's latest generation cab,Electric doors and windows、Central control door lock,Leisa fixed berth,Eliminate folding before and after use,Ready to use;
Rubber suspension system for rear suspension(Leaf spring suspension optional);
Slewing does not interfere with the hydraulic system of the upper air conditioner;
5、Intelligence:Man-machine interchange system
Intelligent integration of handle“Action+Throttle”,No need for foot control pedal,Significantly reduce the intensity of operation;
Add body controller,Realize the light、Wiper and other centralized logic control,Improve the intelligent control level of the whole vehicle,Effectively improve the reliability of body control;
Paramètres du produit
Category |
Project |
Unit |
FTC25X5-1 |
|
Size |
Overall dimensions of the complete machine (Long×Wide×High) |
mm |
13180×2575×3640 |
|
Parameter |
Wheelbase |
mm |
4700+1350 |
|
Wheel track |
Front wheel (One axis) |
mm |
2060 |
|
Rear wheel (Two、Three axes) |
mm |
1854 |
||
Weight |
Total mass in running condition |
kg |
34150 |
|
Parameter |
Axle load |
Front axle |
kg |
8150 |
Two、Three axes |
kg |
26000 |
||
Drive |
Maximum travel speed |
Km/h |
90 |
|
Parameter |
Minimum turning diameter |
m |
22 |
|
Minimum ground clearance |
mm |
245 |
||
Angle of approach |
° |
17.5 |
||
Departure angle |
° |
14 |
||
Braking distance(Muzzle velocity 30km/h) |
m |
≤10 |
||
Maximum climbing gradient |
% |
50 |
||
Fuel consumption of 100 km(60Km/hConstant speed fuel consumption) |
L |
30 |
||
Power |
Engine model |
|
WP7.300E51 |
|
Parameter |
Engine Power Rating |
kW@r/min |
220/2100 |
|
|
Engine rated torque |
Nm@r/min |
1250/1200~1600, |
|
Main performance parameters |
Maximum rated lifting capacity |
t |
25 |
|
Minimum rated amplitude |
m |
3 |
||
Boom length (5-section arm) |
m |
11~43.2(UShape) |
||
Length of jib |
m |
8.3 |
||
Maximum lifting height |
Basic arm |
m |
11.5 |
|
Full extension of main boom |
m |
44 |
||
Full extension of main boom+Jib |
m |
51.7 |
||
Turning radius of rotary table tail |
mm |
3345 |
||
Maximum lifting moment |
Basic arm |
kN·m |
1213 |
|
Longest main arm |
kN·m |
769 |
||
Outrigger span |
Longitudinal span |
mm |
5450 |
|
Transverse span |
mm |
6400 |
||
Job |
Maximum giant slalom speed |
r/min |
2 |
|
Full extension of boom/Shorten time |
S |
90/110 |
||
Jib lift/Arm drop time |
S |
40/50~60 |
||
Time to put the income and expenditure leg |
Horizontal leg |
S |
30/25 |
|
Vertical leg |
S |
35/30 |
||
Main lifting speed(The single rope is empty/Fully loaded) |
m/min |
130/75 |
||
Auxiliary lifting speed(The single rope is empty/Fully loaded) |
m/min |
120/70 |