BAOMAG BW203AD-4HF Rouleau de route
Caractéristiques du produit
1.High frequency excitation system
BW203AD-4HFWith the help of a high frequency excitation system,Can transmit compaction energy at a higher frequency,This enables the user to increase the working speed in real time.,Improve work efficiency。
2、The operation is simple and convenient
Seat capable of rotating and sliding
Two integrated vibration control buttons、Multifunction travel control lever for edge trimmer operation button and crab steering operation button
The steering hinge is located in the middle of the fuselage,To obtain overlapping drum compaction trajectories
Front and rear drum can turn left、Side shift 170 mm on both right sides,Can be adjusted during walking
Automatic vibration control
3、Good view
Rack with open design,The driver can clearly observe the working state of the steel wheel surface and the water spray nozzle
The steel wheel legs are inclined forward and backward respectively.,Avoid blocking the driver's view of the rim of the drum by the drum legs.。It is particularly prominent when the welt is compacted.
4、Advanced design
Driving mode of wheel reducer and hydraulic motor,The walking output torque of the road roller is improved.,Roller is more sensitive when backing up
The Deutz engine has a high reserve power,Able to work under severe working conditions(High altitude or high ambient temperature)Normal construction。The center joint is equipped with a highly loaded slewing bearing.
5、And that safety performance is high
Spring-loaded brakes controlled manually or automatically when the pressure is reduced
Battery switch
Additional diesel strainer with oil-water separator
Seat contact switch
Maintenance work can be done standing on the ground
6、Various optional devices improve the working efficiency of the road roller
Paramètres du produit
Weight |
|
|
Operating weight(ROPSCab) (CECEStandard) |
Kilogram |
13200 |
Front drum load(CECEStandard) |
Kilogram |
6600 |
Rear drum load(CECEStandard) |
Kilogram |
6600 |
Static line pressure of front drum(CECEStandard) |
Kilogram/Centimeters |
30.9 |
Static line pressure of rear drum(CECEStandard) |
Kilogram/Centimeters |
30.9 |
Maximum weight |
Kilogram |
14000 |
Size |
|
|
Turning radius,Inside |
Millimeter |
4170 |
Walking characteristics |
|
|
Speed 1 |
Kilometer/Hour |
0-6 |
Speed 2 |
Kilometer/Hour |
0-11 |
Maximum gradeability, Without/With vibration |
% |
40/35 |
Drive |
|
|
Engine manufacturer |
|
Deutz |
Model |
|
TCD 2012 L04 2V |
Emission level |
|
StageIIIa / Tier3 |
Cooling method |
|
Water cooling |
Number of cylinders |
|
4 |
Output Power( ISO 14396 standard) |
Kilowatt |
100 |
Rotating speed |
Turn/Minute |
2300 |
Electrical equipment |
Volt |
12 |
Drive drum |
|
|
Brake |
|
|
Working brake |
|
Hydrostatic |
Parking brake |
|
Mechanics |
Turn |
|
|
Crab line,Drum lateral offset right/Left |
Millimeter |
170 |
Steering swing angle+/- |
Degree |
6-30 |
Steering system |
|
Swing hinged type |
Excitation system |
|
|
Vibrating steel wheel |
|
Front+After |
Drive system |
|
Standard |
Vibration frequency |
Hertz |
48/60 |
Amplitude |
Millimeter |
0.69/0.29 |
Exciting force |
A thousand cows |
18.6/12.1 |
Capacity |
|
|
Fuel tank |
Liter |
200 |
Water tank |
Liter |
1000 |