XCMG XCR30 Grue de terrain accidenté
Caractéristiques du produit
Boom télescopique de la marque 4 sections de XCMG grue XCR30 de terrain accidenté de 30 tonnes
The total rated loads given in the rated load charts are the maximum lifting capacity when the crane is set up on firm and level ground, which includes the weight of the hook block and slings. The weight of above-mentioned devices should be deducted from the rated lifting load.
The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection. Take boom deflection into consideration before beginning a lifting operation.
A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).
Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.
Article | Unité | Paramètre |
Paramètres de mesure | ||
Empattement | (millimètre) | 3600 |
Voie de roue | (millimètre) | (Avant / Arrière) 2300 / 2300 |
Paramètres de poids | ||
Poids brut du véhicule lors de la conduite | (kg) | 27334 |
Charge par essieu | (kg) | (1er essieu / 2ème essieu) 13157 / 13763 |
Paremètre cinétique | ||
Type de moteur | - | Modèle : B6.7 |
Puissance nette du moteur | (kw / r / min) | 145 |
Paramètres de conduite | ||
Vitesse maximum de voyage | (km / h) | 41 |
Vitesse de voyage minimum | (km / h) | 1.6 |
Swerve | ||
Rayon de rotation minimum | M) | 9.6 |
Gradabilité maximale | (%) | 78 |
Min. est là. Garde au sol de la machine | (millimètre) | 345 |
Angle d 'approche | (°) | 20.5 |
Angle de départ | (°) | 19.6 |
Distance de freinage | M) | 9 |
Principaux paramètres de performance | ||
Oui, Max. Capacité de levage évaluée | (T) | 30 |
Plage nominale min. | M) | 3 |
Oui, Max. Moment de charge de la flèche de base | (kN · m) | 989.8 |
Rayon de giration de la queue de plaque tournante | (millimètre) | 3823 |
Outrigger | ||
Longitudinal | M) | 6.8 |
Horizontale | M) | 6.8 |
Hauteur de levage max. | ||
Bôme de base | M) | 10.2 |
Le plus long boom principal | M) | 34.4 |
La plus longue flèche principale + flèche auxiliaire | M) | 42.2 |
Longueur de flèche de la grue | ||
Le plus long boom principal | M) | 35 |
La plus longue flèche principale + flèche auxiliaire + extension | - | - |
Vitesse de travail | ||
Vitesse d 'orientation maximale | (tr / min) | 2.5 |
Vitesse de levage | ||
Mécanisme de levage principal | (m / min) | 140 |
Mécanisme de levage auxiliaire | (m / min) | 140 |